WISY Inline Filters
The WISY LineAr 100 is an inline rainwater harvesting filter for installation inside rainwater storage tanks and access shafts.
Easy Installation - minimal height difference between inlet & outlet
Due to the minimal height difference of only 5 cm between inlet and outlet, the WISY LineAr 100 is especially well-suited for new builds and retrofit installations.
The space-saving WISY LineAr 100 rainwater filter is easy to plan and can be installed without any extra excavation work. There are just five centimeters height difference between the rainwater inlet and the dirty water outlet. This minimal height difference ensures the WISY LineAr Filter 100 is extremely easy to integrate into existing pipework.
It can be located inside the rainwater storage tank without changing the gradient of existing subsoil piping.
WISY LineAr 100 Rainwater Filter | Video
Advantages to other inline filters
Like all rainwater filters from WISY, the LineAr 100 has a vertical filter mesh and operates on the principle of adhesion to ensure high filter efficiency & nearly self-cleaning operation with prolonged maintenance intervals.
Leaves, moss and other suspended particles are simply flushed past the filter into the drain outlet.
This is a distinct advantage in design and operation in comparison to other inline rainwater filters that are almost horizontal and where the filter-mesh easily becomes clogged with dirt very quickly.
The pipe diameter is maintained throughout the WISY LineAr 100 filter chamber and poses no obstacle to high rainwater influx during freak-precipitation events. The filter is therefore fully drainage-safe and maintains the standards all WISY rainwater harvesting filters adhere to.
Harvested rainwater is not only clean, but naturally soft as well and therefore ideal for flushing toilets, washing laundry or garden irrigation.
The anti-flooding flap valve prevents dirty water from back-flowing into the rainwater storage tank Installation downstream of the filter in the stormdrain outlet of the storage tankCan either be fitted inside or outside of the tank Outside installation recommended in small concrete chamberAccess required to the manual locking lever Dimensions: 310x200x190 (LxHxW)Maintenance-Free
Inline Rainwater Harvesting Filter in PE - (polyethylene) For installation in rainwater storage tanks Height Difference Inlet/Outlet: 52mm Housing & Material in stainless steel Filter insert (stainless-steel/dishwasher-safe) Filter mesh size 0.44 mm Construction of the vertically placed filter-mesh washes out large and fine dirt (self-cleaning) Filter insert is easy to remove - Maintenance Interval: 2-3 times/year Moss, leaves and insects are automatically washed into the drain Over 90% of the rainwater is collected Meets DIN 1986 Inlet: DN 100, 1x vertical outlet (Tank): DN 100, 1x outlet (Drain): DN 100 Area of application: for roof areas of up to 246 m²
Inline Rainwater Harvesting Filter in V2A - (stainless-steel) For installation in rainwater storage tanks Height Difference Inlet/Outlet: 52mm Housing & Material in stainless steel Filter insert (stainless-steel/dishwasher-safe) Filter mesh size 0.44 mm Construction of the vertically placed filter-mesh washes out large and fine dirt (self-cleaning) Filter insert is easy to remove - Maintenance Interval: 2-3 times/year Moss, leaves and insects are automatically washed into the drain Over 90% of the rainwater is collected Meets DIN 1986 Inlet: DN 100, 1x vertical outlet (Tank): DN 100, 1x outlet (Drain): DN 100 Area of application: for roof areas of up to 246 m²