WFF 300
Rainwater Harvesting Filter in PP - (polypropylene) Standard Version | Height: 1.035mm | extension tube/riser available (additional accessory) for direct underground/subsoil installation (no concrete housing chamber required) Maximum sustainable vehicle weight: 12t Steel lid & base-plate; closing ring with certified child-safety device Filter insert in stainless-steel with 50cm stainless-steel lifting handle Filter mesh size 0.38 mm (380 micron) For connection to the drainpipe in the ground Construction of the vertically placed filter washes out large and fine dirt Moss, leaves and insects are automatically washed into the drain Over 95% of the rainwater is collected Self-cleaning / low filter maintenance Meets DIN 1072, DIN EN 752, DIN 1989 Inlet: 12"/DN 300, Outlet Tank: 8"/DN 200, Outlet Drain: 12"/DN 300 Height difference Inlet > Tank Outlet: 465mm Area of application: for roof areas of up to 3,000 m² Install the incoming rainwater pipe with a straight piece with a minimum length of 1.5m excluding bends Pipe downgrade: 1%
Rainwater Harvesting Filter in PP - (polypropylene) Standard Version | Height: 1.035mm | extension tube/riser available (additional accessory) for direct underground/subsoil installation (no concrete housing chamber required) Maximum sustainable vehicle weight: 60t Steel lid & base-plate; closing ring with certified child-safety device Filter insert in stainless-steel with 50cm stainless-steel lifting handle Filter mesh size 0.38 mm (380 micron) For connection to the drainpipe in the ground Construction of the vertically placed filter washes out large and fine dirt Moss, leaves and insects are automatically washed into the drain Over 95% of the rainwater is collected Self-cleaning / low filter maintenance Meets DIN 1072, DIN EN 752, DIN 1989 Inlet: 12"/DN 300, Outlet Tank: 8"/DN 200, Outlet Drain: 12"/DN 300 Height difference Inlet > Tank Outlet: 465mm Area of application: for roof areas of up to 3,000 m² Install the incoming rainwater pipe with a straight piece with a minimum length of 1.5m excluding bends Pipe downgrade: 1%