EBARA Idrogo
EBARA IDROGO 5" submersible centrifugal multistage pumps in stainless-steel AISI 304 are suitable for water supply from wells, cistern tanks & rainwater harvesting tanks.
The motor is cooled by the pumped liquid passing around the motor cover within a water-jacket, allowing the pump to operate fully- as well as partially-submerged. The double mechanical seal within an interpoised oil-chamber ensures a long lifespan and improved reliability.
Applications
EBARA Idrogo pumps are suitable for pressurised rainwater & well-water supply at domestic, agricultural and commercial facilities with a volume requirement of up to 120 litres per minute.
Pump Operation
All EBARA Idrogo pumps supplied by Gemgate are fitted with 20 metres cable length as standard; cable-type HO7 RNF.
For automatic pressurised water supply and dry-run protection an additional external Pressure Switch is required. Pump motor-protection can be included when operating the pump via a Control Panel.
5"-Vertical multistage submersible pressure pump in stainless-steel for clean water with 20m cable 400V|3Ph|50Hz| P1= 0.95kW| P2= 0.60kW| I=1.9A for pressurised water-supply from wells, cistern tanks & rainwater harvesting tanks Fully submerged or partially submerged operation| IP 68 Insulation-Class: F | 2-pole T(max)=40°C without automatic level controlPump body, casing cover in stainless steel (CrNi-Steel 1.4301) External casing & motor casing in stainless steel (CrNi-steel 1.4301) Double mechanical seal (carbon/ceramic/NBR) with interpoised oil-chamber Impeller & diffuser in technopolymer Discharge outlet: 1¼“ (FT) Sieve intake | Solids passage: 2.5 mmH(max)= 48.0 m | Q(max)=4.8 m³/h Submergence(max)=17 m WRAS-approved | TÜV/GS-certified | CE-certified | WEEE-vertified Made in EU
5"-Vertical multistage submersible pressure pump in stainless-steel for clean water with 20m cable 400V|3Ph|50Hz| P1= 1.18kW| P2= 0.75kW| I=2.2A for pressurised water-supply from wells, cistern tanks & rainwater harvesting tanks Fully submerged or partially submerged operation| IP 68 Insulation-Class: F | 2-pole T(max)=40°C without automatic level controlPump body, casing cover in stainless steel (CrNi-Steel 1.4301) External casing & motor casing in stainless steel (CrNi-steel 1.4301) Double mechanical seal (carbon/ceramic/NBR) with interpoised oil-chamber Impeller & diffuser in technopolymer Discharge outlet: 1¼“ (FT) Sieve intake | Solids passage: 2.5 mmH(max)= 60.0 m | Q(max)=4.8 m³/h Submergence(max)=17 m WRAS-approved | TÜV/GS-certified | CE-certified | WEEE-vertified Made in EU
5"-Vertical multistage submersible pressure pump in stainless-steel for clean water with 20m cable 400V|3Ph|50Hz| P1= 1.33kW| P2= 0.90kW| I=2.4A for pressurised water-supply from wells, cistern tanks & rainwater harvesting tanks Fully submerged or partially submerged operation| IP 68 Insulation-Class: F | 2-pole T(max)=40°C without automatic level controlPump body, casing cover in stainless steel (CrNi-Steel 1.4301) External casing & motor casing in stainless steel (CrNi-steel 1.4301) Double mechanical seal (carbon/ceramic/NBR) with interpoised oil-chamber Impeller & diffuser in technopolymer Discharge outlet: 1¼“ (FT) Sieve intake | Solids passage: 2.5 mmH(max)= 72.0 m | Q(max)=4.8 m³/h Submergence(max)=17 m WRAS-approved | TÜV/GS-certified | CE-certified | WEEE-vertified Made in EU
5"-Vertical multistage submersible pressure pump in stainless-steel for clean water with 20m cable 400V|3Ph|50Hz| P1= 1.55kW| P2= 1.10kW| I=3.0A for pressurised water-supply from wells, cistern tanks & rainwater harvesting tanks Fully submerged or partially submerged operation| IP 68 Insulation-Class: F | 2-pole T(max)=40°C without automatic level controlPump body, casing cover in stainless steel (CrNi-Steel 1.4301) External casing & motor casing in stainless steel (CrNi-steel 1.4301) Double mechanical seal (carbon/ceramic/NBR) with interpoised oil-chamber Impeller & diffuser in technopolymer Discharge outlet: 1¼“ (FT) Sieve intake | Solids passage: 2.5 mmH(max)= 84.0 m | Q(max)=4.8 m³/h Submergence(max)=17 m WRAS-approved | TÜV/GS-certified | CE-certified | WEEE-vertified Made in EU
5"-Vertical multistage submersible pressure pump in stainless-steel for clean water with 20m cable 400V|3Ph|50Hz| P1= 1.22kW| P2= 0.90kW| I=2.3A for pressurised water-supply from wells, cistern tanks & rainwater harvesting tanks Fully submerged or partially submerged operation| IP 68 Insulation-Class: F | 2-pole T(max)=40°C without automatic level controlPump body, casing cover in stainless steel (CrNi-Steel 1.4301) External casing & motor casing in stainless steel (CrNi-steel 1.4301) Double mechanical seal (carbon/ceramic/NBR) with interpoised oil-chamber Impeller & diffuser in technopolymer Discharge outlet: 1¼“ (FT) Sieve intake | Solids passage: 2.5 mmH(max)= 49.0 m | Q(max)=7.2 m³/h Submergence(max)=17 m WRAS-approved | TÜV/GS-certified | CE-certified | WEEE-vertified Made in EU
5"-Vertical multistage submersible pressure pump in stainless-steel for clean water with 20m cable 400V|3Ph|50Hz| P1= 1.52kW| P2= 1.10kW| I=3.1A for pressurised water-supply from wells, cistern tanks & rainwater harvesting tanks Fully submerged or partially submerged operation| IP 68 Insulation-Class: F | 2-pole T(max)=40°C without automatic level controlPump body, casing cover in stainless steel (CrNi-Steel 1.4301) External casing & motor casing in stainless steel (CrNi-steel 1.4301) Double mechanical seal (carbon/ceramic/NBR) with interpoised oil-chamber Impeller & diffuser in technopolymer Discharge outlet: 1¼“ (FT) Sieve intake | Solids passage: 2.5 mmH(max)= 62.0 m | Q(max)=7.2 m³/h Submergence(max)=17 m WRAS-approved | TÜV/GS-certified | CE-certified | WEEE-vertified Made in EU
5"-Vertical multistage submersible pressure pump in stainless-steel for clean water with 20m cable 400V|3Ph|50Hz| P1= 1.90kW| P2= 1.50kW| I=3.5A for pressurised water-supply from wells, cistern tanks & rainwater harvesting tanks Fully submerged or partially submerged operation| IP 68 Insulation-Class: F | 2-pole T(max)=40°C without automatic level controlPump body, casing cover in stainless steel (CrNi-Steel 1.4301) External casing & motor casing in stainless steel (CrNi-steel 1.4301) Double mechanical seal (carbon/ceramic/NBR) with interpoised oil-chamber Impeller & diffuser in technopolymer Discharge outlet: 1¼“ (FT) Sieve intake | Solids passage: 2.5 mmH(max)= 74.0 m | Q(max)=7.2 m³/h Submergence(max)=17 m WRAS-approved | TÜV/GS-certified | CE-certified | WEEE-vertified Made in EU
5"-Vertical multistage submersible pressure pump in stainless-steel for clean water with 20m cable 230V|1Ph|50Hz| P1= 0.82kW| P2= 0.44kW| I=3.8A for pressurised water-supply from wells, cistern tanks & rainwater harvesting tanks Fully submerged or partially submerged operation| IP 68 Insulation-Class: F | 2-pole T(max)=40°C without automatic level controlPump body, casing cover in stainless steel (CrNi-Steel 1.4301) External casing & motor casing in stainless steel (CrNi-steel 1.4301) Double mechanical seal (carbon/ceramic/NBR) with interpoised oil-chamber Impeller & diffuser in technopolymer Discharge outlet: 1¼“ (FT) Sieve intake | Solids passage: 2.5 mmH(max)= 36.5 m | Q(max)=4.8 m³/h Submergence(max)=17 m WRAS-approved | TÜV/GS-certified | CE-certified | WEEE-vertified Made in EU
5"-Vertical multistage submersible pressure pump in stainless-steel for clean water with 20m cable 230V|1Ph|50Hz| P1= 0.82kW| P2= 0.44kW| I=3.8A for pressurised water-supply from wells, cistern tanks & rainwater harvesting tanks Fully submerged or partially submerged operation| IP 68 Insulation-Class: F | 2-pole T(max)=40°C Dry-Run protective operation via Float-Switch Pump body, casing cover in stainless steel (CrNi-Steel 1.4301) External casing & motor casing in stainless steel (CrNi-steel 1.4301) Double mechanical seal (carbon/ceramic/NBR) with interpoised oil-chamber Impeller & diffuser in technopolymer Discharge outlet: 1¼“ (FT) Sieve intake | Solids passage: 2.5 mmH(max)= 36.5 m | Q(max)=4.8 m³/h Submergence(max)=17 m WRAS-approved | TÜV/GS-certified | CE-certified | WEEE-vertified Made in EU
5"-Vertical multistage submersible pressure pump in stainless-steel for clean water with 20m cable 230V|1Ph|50Hz| P1= 1.00kW| P2= 0.60kW| I=4.3A for pressurised water-supply from wells, cistern tanks & rainwater harvesting tanks Fully submerged or partially submerged operation| IP 68 Insulation-Class: F | 2-pole T(max)=40°C without automatic level controlPump body, casing cover in stainless steel (CrNi-Steel 1.4301) External casing & motor casing in stainless steel (CrNi-steel 1.4301) Double mechanical seal (carbon/ceramic/NBR) with interpoised oil-chamber Impeller & diffuser in technopolymer Discharge outlet: 1¼“ (FT) Sieve intake | Solids passage: 2.5 mmH(max)= 48.0 m | Q(max)=4.8 m³/h Submergence(max)=17 m WRAS-approved | TÜV/GS-certified | CE-certified | WEEE-vertified Made in EU
5"-Vertical multistage submersible pressure pump in stainless-steel for clean water with 20m cable 230V|1Ph|50Hz| P1= 1.00kW| P2= 0.60kW| I=4.3A for pressurised water-supply from wells, cistern tanks & rainwater harvesting tanks Fully submerged or partially submerged operation| IP 68 Insulation-Class: F | 2-pole T(max)=40°C Dry-Run protective operation via Float-Switch Pump body, casing cover in stainless steel (CrNi-Steel 1.4301) External casing & motor casing in stainless steel (CrNi-steel 1.4301) Double mechanical seal (carbon/ceramic/NBR) with interpoised oil-chamber Impeller & diffuser in technopolymer Discharge outlet: 1¼“ (FT) Sieve intake | Solids passage: 2.5 mmH(max)= 48.0 m | Q(max)=4.8 m³/h Submergence(max)=17 m WRAS-approved | TÜV/GS-certified | CE-certified | WEEE-vertified Made in EU
5"-Vertical multistage submersible pressure pump in stainless-steel for clean water with 20m cable 230V|1Ph|50Hz| P1= 1.25kW| P2= 0.75kW| I=5.7A for pressurised water-supply from wells, cistern tanks & rainwater harvesting tanks Fully submerged or partially submerged operation| IP 68 Insulation-Class: F | 2-pole T(max)=40°C without automatic level controlPump body, casing cover in stainless steel (CrNi-Steel 1.4301) External casing & motor casing in stainless steel (CrNi-steel 1.4301) Double mechanical seal (carbon/ceramic/NBR) with interpoised oil-chamber Impeller & diffuser in technopolymer Discharge outlet: 1¼“ (FT) Sieve intake | Solids passage: 2.5 mmH(max)= 60.0 m | Q(max)=4.8 m³/h Submergence(max)=17 m WRAS-approved | TÜV/GS-certified | CE-certified | WEEE-vertified Made in EU
5"-Vertical multistage submersible pressure pump in stainless-steel for clean water with 20m cable 230V|1Ph|50Hz| P1= 1.25kW| P2= 0.75kW| I=5.7A for pressurised water-supply from wells, cistern tanks & rainwater harvesting tanks Fully submerged or partially submerged operation| IP 68 Insulation-Class: F | 2-pole T(max)=40°C Dry-Run protective operation via Float-Switch Pump body, casing cover in stainless steel (CrNi-Steel 1.4301) External casing & motor casing in stainless steel (CrNi-steel 1.4301) Double mechanical seal (carbon/ceramic/NBR) with interpoised oil-chamber Impeller & diffuser in technopolymer Discharge outlet: 1¼“ (FT) Sieve intake | Solids passage: 2.5 mmH(max)= 60.0 m | Q(max)=4.8 m³/h Submergence(max)=17 m WRAS-approved | TÜV/GS-certified | CE-certified | WEEE-vertified Made in EU
5"-Vertical multistage submersible pressure pump in stainless-steel for clean water with 20m cable 230V|1Ph|50Hz| P1= 1.42kW| P2= 0.90kW| I=6.8A for pressurised water-supply from wells, cistern tanks & rainwater harvesting tanks Fully submerged or partially submerged operation| IP 68 Insulation-Class: F | 2-pole T(max)=40°C without automatic level controlPump body, casing cover in stainless steel (CrNi-Steel 1.4301) External casing & motor casing in stainless steel (CrNi-steel 1.4301) Double mechanical seal (carbon/ceramic/NBR) with interpoised oil-chamber Impeller & diffuser in technopolymer Discharge outlet: 1¼“ (FT) Sieve intake | Solids passage: 2.5 mmH(max)= 72.0 m | Q(max)=4.8 m³/h Submergence(max)=17 m WRAS-approved | TÜV/GS-certified | CE-certified | WEEE-vertified Made in EU
5"-Vertical multistage submersible pressure pump in stainless-steel for clean water with 20m cable 230V|1Ph|50Hz| P1= 1.42kW| P2= 0.90kW| I=6.8A for pressurised water-supply from wells, cistern tanks & rainwater harvesting tanks Fully submerged or partially submerged operation| IP 68 Insulation-Class: F | 2-pole T(max)=40°C Dry-Run protective operation via Float-Switch Pump body, casing cover in stainless steel (CrNi-Steel 1.4301) External casing & motor casing in stainless steel (CrNi-steel 1.4301) Double mechanical seal (carbon/ceramic/NBR) with interpoised oil-chamber Impeller & diffuser in technopolymer Discharge outlet: 1¼“ (FT) Sieve intake | Solids passage: 2.5 mmH(max)= 72.0 m | Q(max)=4.8 m³/h Submergence(max)=17 m WRAS-approved | TÜV/GS-certified | CE-certified | WEEE-vertified Made in EU
5"-Vertical multistage submersible pressure pump in stainless-steel for clean water with 20m cable 230V|1Ph|50Hz| P1= 1.60kW| P2= 1.10kW| I=7.3A for pressurised water-supply from wells, cistern tanks & rainwater harvesting tanks Fully submerged or partially submerged operation| IP 68 Insulation-Class: F | 2-pole T(max)=40°C without automatic level controlPump body, casing cover in stainless steel (CrNi-Steel 1.4301) External casing & motor casing in stainless steel (CrNi-steel 1.4301) Double mechanical seal (carbon/ceramic/NBR) with interpoised oil-chamber Impeller & diffuser in technopolymer Discharge outlet: 1¼“ (FT) Sieve intake | Solids passage: 2.5 mmH(max)= 84.0 m | Q(max)=4.8 m³/h Submergence(max)=17 m WRAS-approved | TÜV/GS-certified | CE-certified | WEEE-vertified Made in EU
5"-Vertical multistage submersible pressure pump in stainless-steel for clean water with 20m cable 230V|1Ph|50Hz| P1= 1.60kW| P2= 1.10kW| I=7.3A for pressurised water-supply from wells, cistern tanks & rainwater harvesting tanks Fully submerged or partially submerged operation| IP 68 Insulation-Class: F | 2-pole T(max)=40°C Dry-Run protective operation via Float-Switch Pump body, casing cover in stainless steel (CrNi-Steel 1.4301) External casing & motor casing in stainless steel (CrNi-steel 1.4301) Double mechanical seal (carbon/ceramic/NBR) with interpoised oil-chamber Impeller & diffuser in technopolymer Discharge outlet: 1¼“ (FT) Sieve intake | Solids passage: 2.5 mmH(max)= 84.0 m | Q(max)=4.8 m³/h Submergence(max)=17 m WRAS-approved | TÜV/GS-certified | CE-certified | WEEE-vertified Made in EU
5"-Vertical multistage submersible pressure pump in stainless-steel for clean water with 20m cable 230V|1Ph|50Hz| P1= 1.33kW| P2= 0.90kW| I=6.4A for pressurised water-supply from wells, cistern tanks & rainwater harvesting tanks Fully submerged or partially submerged operation| IP 68 Insulation-Class: F | 2-pole T(max)=40°C without automatic level controlPump body, casing cover in stainless steel (CrNi-Steel 1.4301) External casing & motor casing in stainless steel (CrNi-steel 1.4301) Double mechanical seal (carbon/ceramic/NBR) with interpoised oil-chamber Impeller & diffuser in technopolymer Discharge outlet: 1¼“ (FT) Sieve intake | Solids passage: 2.5 mmH(max)= 49.0 m | Q(max)=7.2 m³/h Submergence(max)=17 m WRAS-approved | TÜV/GS-certified | CE-certified | WEEE-vertified Made in EU
5"-Vertical multistage submersible pressure pump in stainless-steel for clean water with 20m cable 230V|1Ph|50Hz| P1= 1.33kW| P2= 0.90kW| I=6.4A for pressurised water-supply from wells, cistern tanks & rainwater harvesting tanks Fully submerged or partially submerged operation| IP 68 Insulation-Class: F | 2-pole T(max)=40°C Dry-Run protective operation via Float-Switch Pump body, casing cover in stainless steel (CrNi-Steel 1.4301) External casing & motor casing in stainless steel (CrNi-steel 1.4301) Double mechanical seal (carbon/ceramic/NBR) with interpoised oil-chamber Impeller & diffuser in technopolymer Discharge outlet: 1¼“ (FT) Sieve intake | Solids passage: 2.5 mmH(max)= 49.0 m | Q(max)=7.2 m³/h Submergence(max)=17 m WRAS-approved | TÜV/GS-certified | CE-certified | WEEE-vertified Made in EU
5"-Vertical multistage submersible pressure pump in stainless-steel for clean water with 20m cable 230V|1Ph|50Hz| P1= 1.62kW| P2= 1.10kW| I=7.5A for pressurised water-supply from wells, cistern tanks & rainwater harvesting tanks Fully submerged or partially submerged operation| IP 68 Insulation-Class: F | 2-pole T(max)=40°C without automatic level controlPump body, casing cover in stainless steel (CrNi-Steel 1.4301) External casing & motor casing in stainless steel (CrNi-steel 1.4301) Double mechanical seal (carbon/ceramic/NBR) with interpoised oil-chamber Impeller & diffuser in technopolymer Discharge outlet: 1¼“ (FT) Sieve intake | Solids passage: 2.5 mmH(max)= 62.0 m | Q(max)=7.2 m³/h Submergence(max)=17 m WRAS-approved | TÜV/GS-certified | CE-certified | WEEE-vertified Made in EU
5"-Vertical multistage submersible pressure pump in stainless-steel for clean water with 20m cable 230V|1Ph|50Hz| P1= 1.62kW| P2= 1.10kW| I=7.5A for pressurised water-supply from wells, cistern tanks & rainwater harvesting tanks Fully submerged or partially submerged operation| IP 68 Insulation-Class: F | 2-pole T(max)=40°C Dry-Run protective operation via Float-Switch Pump body, casing cover in stainless steel (CrNi-Steel 1.4301) External casing & motor casing in stainless steel (CrNi-steel 1.4301) Double mechanical seal (carbon/ceramic/NBR) with interpoised oil-chamber Impeller & diffuser in technopolymer Discharge outlet: 1¼“ (FT) Sieve intake | Solids passage: 2.5 mmH(max)= 62.0 m | Q(max)=7.2 m³/h Submergence(max)=17 m WRAS-approved | TÜV/GS-certified | CE-certified | WEEE-vertified Made in EU